Safety shoes awarenessSafety shoes are collectively referred to as safety footwear and protective footwear, and generally refer to footwear worn in different workplaces to protect the feet and legs from foreseeable injuries. Safety shoes are high-tech and high value-added footwear products. The production process of safety shoes is very demanding on raw materials, auxiliary materials, chemical materials, and mechanical equipment. At present, many shoes with a certain scale and grade are produced in China. The company has turned its sights on safety footwear, a market area that was previously occupied by developed countries.According to the meaning of safety shoes, you can know that it has a variety of protection features:1. Flood prevention--adopts industry standard (protection toe safety shoes LD50-94), protect toe safety shoes with steel lining as inner lining, not only has static pressure resistance and impact resistance, stab-proof, anti-smashing, is very safe. , After testing, pressure resistance is 10KN, toe impact resistance 23KG impact hammer from 450MM height after the impact of the impact of the toe, the shoe deformation gap> = 15MM, mainly for mining, mechanical construction safety, metallurgy, steel, port handling lifting The shoes used by the heavy industry to protect the safety of the toe, including rubber and elastomer support, are comfortable to wear and do not affect the daily labor.2, anti-puncture - to protect the foot from the sharp object of the stab wound, the maximum can withstand 1100N puncture force, the national special standards.3, anti-static - anti-static shoes according to GB4385-1995 standard production, resistance value range is 100K'Ω-1000M'Ω, the product has good air permeability, anti-static, wear-resistant, anti-skid and other functions, mainly applicable to aviation The aerospace crisis has played a role in avoiding the occurrence of flammable and explosive accidents due to static electricity.4. Oil resistance - According to oil resistance standard test, the volume increase is not more than 12%. If the volume does not increase but shrinks, the shrinkage volume is greater than 0.5% of the original volume or the hardness increase is greater than 10 (Shore A), and flexing 40,000 times per GB/T 3903.1 increases not more than 7mm.5, non-slip - polyurethane molding a big bottom, unique bottom flower design, excellent anti-skid properties.6, acid and alkali - in line with GB12018-89 standard requirements.7. Insulation - Insulation shoes can work in AC 50HZ, 1000V and below or DC 1500V and below power equipment, as auxiliary safety equipment and labor protection products, wearing leather shoes,8, wear-resistant - high-quality soles for a variety of environments.